English
Technical Information
Water pressure
Recommended
Maximum
Hot water temp.
Recommended
Maximum
Max. flow rate - 32551xx1, 74551xx1
spout
handshower
Max. flow rate - 32556xx1, 74554xx1
spout
handshower
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that this
unit be installed by a licensed, professional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
This trim is for use with rough 13439181
(not included). The rough must be installed and the
finished mounting surface completed and made
watertight.
• This unit is not anti-scald. If required by local
code, install in combination with an approved
remote pressure balance valve or other approved
tempering device.
2
15 - 75 PSI (0.1 - 0.5 MPa)
145 PSI (1 MPa)
120°-140° F (48° - 60° C)*
158°F (70° C)*
5.8 GPM (22 L/min)
2.0 GPM (7.6 L/min)
5.8 GPM (22 L/min)
1.75 GPM (6.6 L/min)
• Protection against backflow is provided by check
valve and an automatically resetting diverter.
• 32551xx1, 74551xx1 only: This showerhead
is for use with an automatically compensating valve
rated at 1.5 GPM (5.7 L/min.) or less.
• 32556xx1, 74554xx1 only: This showerhead
is for use with an automatically compensating valve
rated at 1.3 GPM (4.9 L/min.)or less.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
