Idiomas disponibles
Idiomas disponibles
Removing the hedge shear blades
1
010890
CAUTION:
Install the blade cover before removing or installing
•
the shear blades.
Reverse the tool.
1
4
010891
To remove the shear blades, press the locking lever and
with the locking lever pressed turn the undercover
counterclockwise until the symbol
is aligned with the symbol
1
010892
Take out the undercover from the tool.
010893
Loosen two screws with a coin and similars and remove
the shear blades.
1. Blade cover
1. Undercover
2
2. Locking lever
3. Press
3
4. Turn
on the undercover
on the locking lever.
1. Undercover
1. Screws
1
NOTE:
Do not remove the screws. Without removing the
•
screws loosened, shear blades can be removed.
1
010894
Remove the crank from the shear blades.
NOTE:
The crank may remain in the tool.
•
1
011045
NOTE:
In the 2-way usage, the removed grass shear
•
blades need to be sheared in the blade storage
case and stored for future use.
OPERATION
Refer to the Important Safety Instructions before
operation.
CAUTION:
Be careful not to accidentally contact a metal fence
•
or other hard objects while trimming. The blade will
break and may cause serious injury.
Also, be careful for the shear blade not to contact
•
the ground.
Overreaching with a hedge trimmer, particularly
•
from a ladder, is extremely dangerous. Do not work
from anything wobbly or infirm.
010878
15
1. Crank
2. Shear blades
2
1. Grass shear
blade cover
2
2. Grass shear
blade
3. Storage case
3
