Connecting The Pdu - Tripp-Lite PDU3XMV6G32 Manual Del Propietário

Installation

Connecting the PDU

2-1
The PDU3XMV6G32 is equipped with a 32A Red IEC 309 3P + N + E plug.
Model Name Input Plug
32A Red IEC 309
PDU3XMV6G32
3P + N + E
2-2
Connect the input plug to your facility's
compatible AC power source.
2-3
Connect your equipment's input plugs to
the appropriate outlets on the PDU. The
LED near each bank illuminates when
the bank is ready to distribute live
AC power.
Note: It is recommended that you do not
connect a live load to the PDU. If the load you
intend to connect has an ON/OFF switch, please
turn the switch to OFF prior to connection.
2-4
Optional Cord Retention Procedure
Use the included C14 and C20 plastic
sleeves to secure plugs to receptacles.
Attach the sleeve to the plug, making
sure that the pull tabs
the plug and that the fit is secure. To
unplug equipment properly, use the pull
tabs to remove the plug and sleeve from
the receptacle.
14-08-206-93338E.indb 4
Max Input
Amps (Limited Input
by Input Cord Voltage
and Plug) Range
32A 360-415V
2-2
L1-N BANK 1
L2-N BANK 2
2-3
remain outside
A
2-4
4
Output
Voltage Cord
Range Breakers Length
6 x Single
6 ft.
208-240V Pole, 20A
(1.8 m)
Branch-Rated
L1-N BANK 1
A
Outlets
42 Total: 6 Banks
of (1) C19 and
(6) C13
L2-N BANK 2
10/9/2014 11:31:51 AM