Connecting The Pdu - Tripp-Lite PDUMH15NET2LX Manual Del Propietário

Installation
1-5
Cord Retention Shelf
Attachment (Optional): Use 2
screws to attach the cord
A
retention shelf
panel of the PDU.

Connecting the PDU

2-1
Connect Input Plug Adapters
(Optional – PDUMH20NET2
Only): The PDU includes an
adapter that converts its L5-20P
locking input plug to a standard
5-20P input plug. Connecting this
adapter is optional. The PDU will
function normally without
connecting this adapter.
Note: The AC power source should not
share a circuit with a heavy electrical load
(such as an air conditioner or refrigerator).
2-2
Connect Input Power Cord
(PDUMH15NET2 and
PDUMH20NET2): Connect the
input plug
A
source of AC power, such as a
UPS system, PDU or utility outlet.
The PDU should be provided with
over-current protection:
PDUMH15NET2 with a maximum
15A branch-rated protection
device; PDUMH20NET2 with a
maximum 20A branch-rated
protection device.
2-3
Equipment Power Cord
Connection: Insert power cords
into the NEMA 5-15R output
receptacles
or NEMA 5-15/20R output
receptacles
The LED
B
receptacle illuminates when the
receptacle is ready to distribute
live AC power. The digital load
meter will display the total
C
connected equipment load in amps.
17-02-374-9336CB.indb 4
to the front
B
to a compatible
(PDUMH15NET2)
A
(PDUMH20NET2).
A
near each output
1-5
2-1
PDUMH20NET2LX
2-2
2-3
PDUMH15NET2LX
2-3
PDUMH20NET2LX
4
B
A
A
A
B C
A
B C
6/2/2017 2:15:03 PM