cecotec AERO 4280 Manual De Instrucciones página 15

ENGLISH
3. INSTALLATION
Necessary tools for the installation (not included)
Fig. 2
A. Electrical tape
B. 14-mm spanner
C. Flat-blade screwdriver
D. Crosshead screwdriver
E. Step ladder
F. Pliers
1. Bracket installation
Concrete ceiling
Drill two holes of a proper depth (an 8-mm diameter) and introduce two expansion screws on
the holes; then, fix the installation bracket (1) to the expansion screws with the wood screws
and tighten them with the expansion screws nuts. Fig. 3
Wooden ceiling
Fix the installation bracket (1) to the wooden ceiling with 4 wood screws (of at least 7-cm
thickness). Fig. 4
2. Lamp bracket installation
- Loosen the four screws located on the lower surface of the main body (9) of the fan and
remove a screw for later use. Fig. 5
- Join the LED light bracket (11) to the main body (9) of the fan by turning the bracket (11) until
it is fixed and aligned with the three screws of the main body (9) of the fan; then, tighten
the screws and the previously removed screw. Fig. 6
3. Installation of the hanging system
1. Remove the pin (6) from the down rod (3) by removing the R clip (7) and pass the power
cable through the down rod (3), the canopy (4) and the trim (8). Next, fix the down rod
(3) in the main body (9) of the fan and turn it until the holes match the holes in the main
body of the fan. Finally, pass the pin (6) through the holes and fix it with the R clip (7) in
the other end. Fig. 7-8
2. Place the down rod (3) with the hanging ball (2) in the installation bracket (1), turn it all
until the 'tab' on the installation bracket (1) is placed in the 'slot' of the down rod (3) and
it is fixed properly. Fig. 9
3. Lift the canopy (4) to the ceiling to cover the installation bracket (1) (make sure the canopy
(4) is fixed in the two bracket screws), turn the canopy (4) to ensure the screw head is in
the narrow end of the canopy holes and tighten the screws. Fig. 10
4. Electric installation
To carry out the electric installation, follow the steps shown in figure 11. Follow the colour code
and be especially careful with the following indications:
28 ENERGYSILENCE AERO 4280 INVISIBLE WHITE/BLACK/STEEL
1. Connect the 3-pin connection (3P) to the 3-pin connection.
2. Connect the 2-pin connection (2P) to the 2-pin connection.
3. Connect the 1-pin connection (1P) to the 1-pin connection.
5. Lamp glass shade assembly
Align the slot on the glass shade (10) with the slot on the main body (9) of the fan, then, turn
the glass shade (10) smoothly until it is fixed. Fig. 12
6. How to balance the fan
The fan has been balanced before shipping, but this balance may be affected during transport.
Balance the fan following the following steps if the fan is unstable during the installation:
1. Take the two magnetic parts from the balance kit and place them in the upper surface of
the fan, and turn on the fan to check if it is still unstable. Repeat the process until you find
the position in which it is stable.
2. Remove the magnetic parts and stick the other part of the balance kit in place.
4. OPERATION
Fig.13
1. On/off light button
2. Change of light tone (warm, neutral or cold).
3. On/off fan button
4. Fan speed (1-6)
5. Timer (1-2-4-8 h)
6. Winter-summer function
7. Breeze mode
- Once you have installed the ceiling fan, you can start using it.
- Press the on/off button (3) and the blades will start moving. Press the button (4) to choose
the desired fan speed, so you can set the blades spin speed.
- Press the on/off light button (1) to turn the LED light on or off. You can also modify the light
shade, from neutral, warm or cold, by pressing the light shade modification button (2).
- This ceiling fan is fitted with a timer, press the button with the desired time, the different
options are 1, 2, 4 or 8 hours.
- Finally, this fan also has winter-summer function, press the winter-summer function
button (6) to reverse the direction of rotation of the blades. In the summer mode, the
blades generate a nice breeze. However, in the winter mode the blades push the hot air
concentrated in the ceiling down to the floor.
- Press the button (7) to select the breeze mode, in which the fan will generate an air flow
similar to breeze.
ENERGYSILENCE AERO 4280 INVISIBLE WHITE/BLACK/STEEL
ENGLISH
29