To check the programmed time, push the SET DELAY
button. The display will show the time you have
programmed the coffee to brew. If you press the SET
DELAY button again or wait a few seconds, the display
will switch back.
PREPARING FOR USE
Selecting and Measuring Ground Coffee
For best results, use a level tablespoon for ground coffee
measurement. Make sure you use medium grind coffee for
a perfect brew.
A. Suggested Coffee Measurement Chart
To Brew
12 Cups
10 Cups
8 Cups
6 Cups
4 Cups
1 level tablespoon (tbsp) = 5 gr./0.17 oz.
1 cup = 5 fl. oz. of brewed coffee
Use more or less coffee to suit your taste.
B. Water Filtration System (not included with all models)
Congratulations! You are the owner of a MR. COFFEE
water filtration system. Using the Mr. Coffee
water filter in the Mr. Coffee
brewing process helps remove up to 97% of the chlorine
from the water and improves the taste of your coffee.
12
Ground Coffee
9 tbsp.
7.5 tbsp.
6.5 tbsp.
4.5 tbsp.
3 tbsp.
®
carbon-based
®
coffeemaker during the
®
First, look for the MR. COFFEE
Friendly symbol
on the bottom of
your filter basket. If you do not see this
symbol, please call 1-800-672-6333.
To use the water filtration system in
your MR.COFFEE
Coffeemaker, please
®
follow these steps:
1. Align the red indicator on the
frame to the letter that corresponds with
the month that you are using the disk for
the first time. This serves to remind you
to change the disk every month (approx.
30 brewing cycles). To change the disk,
remove the used disk, insert new disk
into the frame.
NOTE: For optimum results, use the water
filtration system with a permanent filter.
2. Rinse the water filter in fresh water
before first use.
3. Follow Adding Water and Coffee
instructions.
4. When you are done brewing your coffee,
rinse the water filter with fresh water. Do
not put your water filter in the
dishwasher.
C. Adding Water and Ground Coffee
1. Open the brew basket lid. For
your convenience, you can lift out the removable
filter basket.
Filter
®
Red
Indicator
Frame
Filter Disk
13