Idiomas disponibles
Idiomas disponibles
Functions
Searching for a Track Quickly
You can select a track directly without the 1 , 2
button.
CDDA/MP3-CD/USB
1.
Press the SEARCH button.
After pressing the SEARCH button, turn
the VOLUME/SEARCH JOG control on the
product to the left or right to select a desired
track.
• You can move to the selected track directly.
2.
When searching is done, the track will
automatically start playing.
Using the Program Function
This function is not available during playback of an
MP3-CD/USB.
• You can program the playback order of up to 99
tracks of your choice.
• However, you must stop playing the CD/USB
before selecting tracks.
1.
While in CD/USB playback mode, press the
5 button to stop playing the CD/USB.
2.
Press the PROGRAM button to display the
message below:
PROG 01 TRACK---
(01= program number, ---= track number)
3.
Use the 1 or 2 button or the VOLUME/
SEARCH JOG to move to a desired track.
• Press 1 to move to the previous track.
• Press 2 to move to the next track.
4.
Press the ¬ button to confirm your
selection. The selection is stored and
5.
To select another track, follow Steps 3 and 4
above.
6.
Press the
button to play the programmed
tracks.
7.
Press the 5 button to stop playing the
programmed tracks, Press the 5 button
again to cancel playing the programmed
tracks.
is displayed.
16
English
• If you eject the disc, CD programming is
cancelled.
If you turn off the product, CD/USB
programming is cancelled.
| NOTES |
✎ CD/USB program play will continue if you try to
switch to another mode.
✎ USB REC, DELETE and TUNING/ALBUM
buttons will not work in Program mode. If
you press such buttons in Program mode,
"PROGRAM PLAY" will be displayed instead.
✎ If a file in the program to be played was not in
a supported format, playback skips to the next
file automatically.
Viewing or Editing Programmed Tracks
You can view and edit a list of programmed tracks.
1.
If a programmed track is being played, press
the 5 button once.
2.
Press the PROGRAM button twice to display
the message below:
SAVED 01 TRACK002
(01= program number, 002= track number)
3.
Repeatedly press the ¬ button until the
desired track is displayed.
4.
Press the 1 or 2 button to select a
different track.
5.
Press the ¬ button to confirm your
selection.
6.
To play the programmed tracks, press the
button.
To repeat
1.
Press the REPEAT button.
Each time you press this button, the mode
changes as follows:
OFF ; TRACK ; ALL
