Idiomas disponibles
Idiomas disponibles
DE
EN
PLEASE NOTE
Examine the shipment to ensure the unit and manual are included and inspect the unit
FR
for any visible damage.
Immediately notify the carrier and/or the supplier about an incomplete shipment or any
IT
damage as a result of inadequate packaging or mishandling.
ES
3.3 Unpacking
NL
Carefully remove the packaging material and unit from the carton.
RUS
PLEASE NOTE
SE
If possible, keep the original packaging for the duration of the guarantee period in the
event a return is necessary.
PT
3.4 Setup location requirements
In order to ensure the safe and trouble-free operation of the device, the setup location must fulfi l
the following prerequisites:
•
Only use this device on a fl at, stable, heat-resistant surface away from water splashes and any
heat sources.
•
Choose the setup location in such a way that children cannot reach any hot surfaces on the
device.
•
Do not operate the device under delicate furniture as the escaping steam could damage them.
•
Do not set up the device in a hot, wet or extremely damp environment or near fl ammable
material.
•
The electrical socket must be easily accessible so that the power lead can be disconnected
easily, in the case of an emergency.
•
The installation and assembly of this device in non-stationary setup locations (e.g. on ships)
must be carried out by specialist companies / electricians, provided they guarantee the prere-
quisites for the safe use of this device.
•
The device shall not be placed in a cabinet while it is in operation.
3.5 Electrical connection
In order to ensure the safe and trouble-free operation of the device, the following instructions
must be observed for the electrical connection:
•
Before connecting the device, compare the connection data (voltage and frequency) on
the rating plate with those of your electrical network. This data must agree in order that no
damages occur in the device. If in doubt, ask your qualifi ed electrician.
•
The connection between the device and the electrical network may employ a 3 meter
long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs or
gangs is prohibited because of the danger of fi re that is involved with this.
•
Make sure that the power cable is undamaged and has not been installed under the
device or over hot or sharp surfaces.
•
The electrical outlet must be protected by a 16A safety cut-out switch.
•
The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. If in doubt, have the house installation
checked over by a qualifi ed electrician. The manufacturer cannot be made responsible for
damages that are caused by a missing or damaged protective conductor.
20
CASO E3
