Idiomas disponibles
Idiomas disponibles
damage the device. Discard the device if damaged. If bleeding occurs, apply steady pressure with
a sterile gauze, pad, or clean cloth at the insertion site until bleeding stops. After bleeding stops,
connect the transmitter to the sensor.
• Do not discard the transmitter in a medical waste container or expose it to extreme heat. The
transmitter contains a battery that may ignite and result in serious injury.
• For questions or concerns related to product use, contact 24-Hour Technical Support for
assistance.
• For medical questions or concerns, contact a healthcare provider.
Precautions
• Do not use the transmitter adjacent to other electrical equipment that may cause interference
with the normal system operation.
• Only use the Guardian 4 sensor (MMT-7040) with the transmitter. Do not use any other sensor.
Other sensors are not intended for use with the transmitter and will damage the transmitter and
the sensor.
• Only use the green colored tester (MMT-7736L) with the transmitter. Pockets on the transmitter are
visible when connected to the tester. Do not use any other test plug. Other test plugs are not
intended for use with the transmitter and will damage the transmitter and the tester.
Figure 1. Transmitter pockets
• Always use the tester when cleaning the transmitter. Do not use any other test plug with the
transmitter. Use of another test plug can allow water to get into the transmitter or can prevent
proper cleaning. Water can damage the transmitter.
• Do not twist the tester or sensor while attached to the transmitter. Twisting the tester or sensor will
damage the transmitter.
• Do not allow the tester to come in contact with any liquid when not connected to the transmitter.
A wet tester can damage the transmitter.
pockets
10
