Idiomas disponibles
Idiomas disponibles
EN
8. MAINTENANCE PLAN
The
maintenance
plan
routines, inspection procedures and
simple processes of maintenance,
using basic tools on the compressor.
Other more complex maintenance
tasks or that requires specific tools
must be carried out by a qualified
technician or the technical assistance.
Intervention
Clean the engine and check all the
screws and nuts
Check the safety and non-return valves
Check the pipes, hoses, connecting
accessories and possible air leaks.
Check the compressed air tank status
Drain the tank
Check the air filter
Clean the air filter
Replace the filter element
from the air filter
Check the compression pump oil
Replace the compression pump oil
Check and replace the safety
and non-return valves
(1) Proceed to a more frequent maintenance when the
compressor is used in areas with too much dust.
includes
The maintenance plan included in
this manual is based on normal work
conditions. If the compressor is used in
severe conditions, such as overcharge,
overheat, damp or dusty abnormal
conditions, ask your distributor for
recommendations.
1st month
or after 20
hours
✓
✓
✓
✓
✓
✓
✓
may lead to injuries or even death.
Always follow the instructions given.
Each 3 months
or after 100
hours
✓(1)
(2) The maintenance of these items must be carried out
by the technical assistance, unless the user possesses the
required tools and technical knowledge.
Not following the instructions
about maintenance and safety
Every 6
Every year or
months or
after 1000
after 500
hours
hours
✓
✓
✓(2)
39
