Idiomas disponibles
Idiomas disponibles
1.2
Setting up your new e-scooter
Your new e-scooter has been thoroughly checked and part-assembled by
our technicians. It's almost ready to ride – just follow these simple set-up
instructions and you'll be ready to go!
1. Set up in box
Keep the e-scooter within the opened box during
set up. This will keep it fi rmly in place for the
next steps.
3. Secure the latch
Lift the latch mechanism until it clips securely into
the stem.
Warning! – Do not ride the scooter if the latch is
loose.
Pure Air
3
2. Raise the stem
Remove any remaining protective packaging from
the e-scooter, then unfold it to its upright position,
making sure the latch is down.
*We strongly recommend you keep the box for the
length of your warranty, in case you need to return
the e-scooter.
4. Lift the handlebar
Lift the handlebar onto the stem ensuring the
internal wires are not trapped and the external
brake cable is not twisted.
6
