Ecco EC2027-WC Instrucciones De Instalación

The EC7008-WK Wireless Camera and Monitor Kit from ECCO is
designed to provide a driver with video and audio from up to four
cameras individually or together on a split screen for ultimate driver
awareness. When properly installed and used in conjunction with
vehicle mirrors, ECCO's EC7008-WK assists drivers during hazardous
parking and backing situations. This manual provides information
about installation, function, safety, maintenance, replacement parts
and warranty.
!
WARNING!
Failure to install or use this product according to manufacturer's recommendations may result in property damage, serious bodily/personal injury,
and/or death to you and those you are seeking to protect!
Do not install and/or operate this safety product unless you have read and understand the safety information
contained
1. Proper installation combined with operator training in the use, care, and maintenance of safety products are essential to ensure the safety of
you and those you are trying to protect.
2. Exercise caution when working with live electrical connections.
3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high current arcing, which
can cause personal injury and/or severe vehicle damage, including fire.
4. Proper placement and installation are vital to the performance of this safety product. Install this product so that the performance of the system
is maximized and the controls are placed within convenient reach of the operator so that s/he can operate the system without losing eye contact
with the roadway.
5. It is the responsibility of the vehicle operator to ensure during use that all features of this product work correctly. In use, the vehicle operator
should ensure the field-of-view of the camera/monitor is not blocked by vehicle components (i.e., open trunks or compartment doors), people,
vehicles, or other obstructions.
6. Never take the right-of-way for granted. It is your responsibility to be sure you can proceed safely before entering an intersection, driving
against traffic, responding at a high rate of speed, walking on or around traffic lanes.
7. This equipment is intended for use by authorized personnel only. The user is responsible for understanding and obeying all laws regarding
safety products. Therefore, the user should check all applicable city, state, and federal laws and regulations. The manufacturer assumes no
liability for any loss resulting from the use of this safety product.
Specifications:
Camera
Image Device
TV System
Array Size
Sensing Area
Scanning System
Sync. System
Resolution
Min. Illumination
Microphone
Video Output
AGC
S/N Ratio
White Balance
BLC
Current Consumption Max. 250mA@12V/140mA@24V
Operating Frequency
Transmitting Distance
Decompression Form
Transmit Output Power
RF Bit Rate
Operating Temperature
Storage Temperature
Installation, Wiring and Function
!
Caution! When drilling into any vehicle surface, make sure that the area is free from any electrical wires, fuel lines,
vehicle upholstery, etc. that could be damaged.
EC2027-WC
1/3" CMOS
PAL/NTSC
728x488 Pixels
4.6228mm x 3.6112mm
2:1 Interlace
Internal
500 TV Lines
0.1 Lux (day), 0 Lux (with IR)
Yes
1.0 vp-p, 75 Ohm
Auto
Better than 48 dB
Auto
Auto
2400-2483.5-MHz
120M (barrier free)
MPEG4
17 dBm
4Mbps
-20°C~70°C, RH 90% Max.
-30°C~80°C, RH 90% Max.
Installation Instructions
Wireless Camera/Monitor System
Monitor
LCD Size
Resolution
Contrast
Brightness
Viewing Angle
DOT Pitch
Aspect Ratio
Channel
Operating Frequency
Receiving Sensitivity
Decompression Form
Modulation
Time Delay
Transmitting Distance
Micro-SD/TF Card
System Format
Power Supply
Power Consumption
Loudspeaker
Operating Temperature
Storage Temperature
EC7008-WK 7" LCD Monitor
7"
800 x 3 (RGB) x 480
500:1
400 cd/m²
U: 50 / D: 70, R/L: 70
0.0642(W) x 0.1790(H)
16:9
4 Channels
2400 - 2483.5 MHz
-89 dBm
MPEG4
2.4G FSK/GFSK
120ms
120 M
Max. 128G
PAL/NTSC
DC 10-32V
Max. 6W
1.5W/8
-20°~+70°C, RH90%
-30°~+80°C, RH90%
Page 1 of 11