International Electrical Symbols - EGAmaster EGATronik Serie Manual De Instrucciones

Danger!
Use of instrument in a manual not specified by the manufacturer may impair safety features/
protection provided by the equipment. Read the following safety information carefully before using
or servicing the instrument.
- Do not apply more than 1000V DC or 750V AC.
- Do not use the Meter around explosive gas, vapor or dust.
- Do not use the Meter in a wet environment.
- When using the test leads, keep your figures away from the lead contacts.
- Keep your figures behind the finger guards on the leads.
- Do not use the Meter with any parts or cover removed.
- When carrying out insulation measurement, do not contact the circuit under test.
Warning!
- Do not use the Meter if it is damaged or metal part is exposed. Look for cracks or missing
plastic.
- Be careful when working above 30V rms, 46.7V ac rms and 70V DC. Such voltages pose a
shock hazard.
- Do not change battery when the Meter is in wet environment.
- Place test leads in proper input terminals. Make sure all the test leads are firmly connected to
the Meters input terminals.
- Make sure the Meter is turned off when opening the battery compartment.
- Carefully read the operating manual before operating the Meter.
- Follow the operating manual all the time when using the Meter and keep the operating manual
in a safe place.
- Wrong operation will cause incident and damage to the Meter.
Caution!
- When performing resistance tests, remove all power from the circuit to be measured and
discharge all the power.
- When servicing the Meter, use only the same model number or identical electrical
specifications of test leads and power adaptor.
- Do not use the Meter if the battery indicator (
battery out from the Meter if it is not used for a long time.
- Do not use or store the Meter in an environment of high temperature, humidity, explosive,
inflammable and strong magnetic field. The performance of the Meter may deteriorate after
dampened.
International symbols on the Meter and in this manual are explained in Table 2.
DCV
ACV

INTERNATIONAL ELECTRICAL SYMBOLS

Table 2. International Electrical Symbols
Equipment protected by double or reinforced insulation
Conforms to Standards of European Union
) shows a battery empty condition. Take the
DC Measurement
AC Measurement
Grounding
See Manual
11