Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Warning: Short-circuits of the battery may cause explosion, fire, personal injury or other severe
consequences!
Powering On/Off the Mobile Phone
Hold the End key for a while to power on the mobile phone. A power-on animation appears on the
display screen.
Input the phone lock code and press the OK key if the mobile phone prompts you to input the phone lock
code. The original code is 1234
Input the PIN and press the OK key if the mobile phone prompts you to input the PIN. The PIN is
provided by the network operator for new opening SIM card.
Enter the standby interface.
To power off the mobile phone, hold the End key for a while.
Linking to the Network
After the SIM card and the mobile phone are successfully unlocked, the mobile phone automatically
searches for an available network. After finding a network, the mobile phone enters the standby state.
When the mobile phone is registered in the network, the name of the network operator is displayed on
the screen. Then you can dial or receive a call.
Dialing Calls
In the standby interface, press number keys to input the area code and the telephone number, and then
press the Dial key to dial a call. To end the call, press the End key.
" Dialing a call to a number in the phonebook
Enter the phonebook and use the up or down direction keys to find the telephone number you want to
call.
Press the Dial key. The mobile phone automatically dials the chosen telephone number.
" Redialing the last number
In the standby interface, press the dial key to show the dialed calls.
Press the up or down direction keys to select a number you want to dial and then press the Dial key.
" Answering incoming calls
Press the Dial key or the Left soft key to answer an incoming call.
Press the End key to end the current conversation.
To reject an incoming call, press the End key or the Right soft key.
Note: If the caller can be identified, the mobile phone will present the calling number. If the calling
number exists in the phonebook, the mobile phone will present both the name and the phone number of
the caller. If the caller cannot be identified, the mobile phone will present the calling number only. You
can answer an incoming call when using a function list or browsing the phonebook.
Using the Headset
It would enter headset mode automatically when you insert headset to the slot. Make sure of inserting it
at the bottom of the slot, or you can't use it normally.
This mobile phone provides two input methods, including English input and numeric input. You can
Input method
P-9
Capítulos
Tabla de contenido
