Operation; Checking For Leaks - Glacier bay FP4AF263CP Guía De Instalación Y Cuidado

Operation

1

Checking for leaks

□
Detach the pull-down spray (B) from the pull-
down spray hose (K). Hold the pull-down spray
hose (K) firm to prevent it from retracting into the
faucet body (A).
□
Ensure the handle is in the off position. Turn the
hot and cold water supplies on and check all
connections for leaks. If leaks are discovered,
check the connections to ensure they are tight
and properly secured.
□
Lift the handle to allow the water to run for
approximately one minute. This flushes away any
debris that could damage the internal parts.
□
Turn the water off and reattach the pull-down
spray (B).
2
Removing the quick connector
CAUTION: Use caution when removing the quick
connector hose to prevent cutting your hands.
□
If it is necessary to remove the quick
connector (F), push the quick connector
housing up, hold the housing together
and pull down.
K
B
1
7
Please contact 1-855-HD-GLACIER for further assistance.
A
2
HOMEDEPOT.COM/GLACIERBAY
3