CASATELLI ALEX 13 2C Manual De Instalación página 107

INDEX
1 GENERAL INTRODUCTION
1.1 SYMBOLS
1.2 DESTINATION OF USE
1.3 SCOPE AND CONTENTS OF MANUAL
1.4 STORAGE OF MANUAL
1.5 UPDATE OF THIS MANUAL
1.6 GENERAL INFORMATION
1.7 MAIN STANDARDS APPLIED AND TO BE APPLIED
1.8 LEGAL WARRANTY
1.9 MANUFACTURER'S LIABILITY
1.10 CHARACTERISTICS OF THE USER
1.11 TECHNICAL ASSISTANCE
1.12 SPARE PARTS
1.13 IDENTIFICATION PLATE
1.14 STOVE DELIVERY
2 SAFETY WARNINGS
2.1 WARNINGS FOR THE INSTALLER
2.2 WARNINGS FOR THE MAINTENANCE TECHNICIAN
2.3 WARNINGS FOR THE USER
3 CHARACTERISTICS OF FUEL
3.1 CHARACTERISTICS OF FUEL
3.2 STORAGE OF PELLETS
4 HANDLING AND TRANSPORT
4.1 REMOVAL FROM TRANSPORT PALLET
5 INSTALLATION
5.1 GENERAL CONSIDERATIONS
5.2 SAFETY PRECAUTIONS
5.3 PLACE OF INSTALLATION OF STOVE
5.4 COMBUSTION AIR
5.5 FLUE GAS EXHAUST PIPE
5.6 STOVE LEVELLING
5.7 CONNECTION TO UTILITIES
5.8 OPTIMISATION OF COMBUSTION
5.9 VENTILATION
6 MAINTENANCE
6.1 MAINTENANCE
7 DEMOLITION AND DISPOSAL
8 USE
8.1 INTRODUCTION
8.2 FIRST START-UP
8.3 CONTROL PANEL
8.4 MAIN MENU
8.5 SETTING THE TEMPERATURE
8.6 SETTING THE OPERATING PROGRAM
8.7 TURNING ON THE STOVE
8.8 TURNING OFF THE STOVE
8.9 RESETTING SYSTEM ERRORS
8.10 HEATING MODE
8.11 PELLET SAVING MODE
8.12 AUTOMATIC OR MANUAL MODE
8.13 MANUAL
8.14 AUTO
9 USER PROGRAMMING
9.1 DATE AND TIME SETTINGS
9.2 WEEKLY PROGRAMMER
9.3 PROGRAM NUMBER
9.4 DAY OF THE WEEK
9.5 HOURS
9.6 MINUTES
9.7 REQUIRED TEMPERATURE
9.8 REQUIRED PROGRAM
9.9 PROGRAM TYPE
9.10 ENABLING THE PROGRAM
> 4-6
1.1 EXAMPLE OF PROGRAMMING
1 STOVE PARAMETERS
1.1 LOADING PELLETS
1.2 FUME EXTRACTION
1.3 ROOM FAN
2 LANGUAGE SELECTION
3 LAST ERROR LOG
4 DUCTED
4.1 DUCTED LEFT
4.2 DUCTED RIGHT
> 7-8
5 DIAGNOSTIC ERRORS
5.1 ERROR 1 NOT ACTIVE
5.2 ERROR 2 PRESSURE SWITCH ALARM
> 9 5.3 ERROR 3 NO PELLETS
5.4 ERROR 4 NOT ACTIVE
5.5 ERROR 5 HIGH EXHAUST TEMPERATURE ALARM
5.6 ERROR 6 SAFETY THERMOSTAT
5.7 ERROR 7 SMOKE EXTRACTION MOTOR ALARM
> 9
5.8 ERROR 8 NOT ACTIVE
5.9 ERROR 9 NOT ACTIVE
5.10 ERROR 10 NOT ACTIVE
5.11 ERROR 11 NOT ACTIVE
> 10-14
5.12 ERROR 12 POWER FAILURE
5.13 ERROR 13 NOT ACTIVE
5.14 ERROR 14 NOT ACTIVE
5.15 ERROR 15 IGNITION FAILURE
5.16 ERROR 16 INTAKE SENSOR FAULT (ONLY IF INTAKE SENSOR
ENABLED)
5.17 ERROR 17 NOT ACTIVE
5.18 ERROR 18 FUME EXTRACTION CIRCUIT FAULT
5.19 ERROR 19 REMOTE CONTROL OVERTEMPERATURE
ALARM (OPTIONAL)
6 PRELIMINARY OPERATIONS
> 15
6.1 LOADING PELLETS
6.2 ELECTRICAL POWER SUPPLY
6.3 POWER ON
> 16
6.4 POWER OFF
6.5 OPERATION WITH AMBIENT PROBE ON STOVE
> 17-18
TROUBLESHOOTING
7 CLEANING
8 HOT AIR DUCTING
9 3RD TANGENTIAL FAN
ID PLATE KEY
WIRING DIAGRAM
DESCRIPTION
> 19
TECHNICAL SPECIFICATIONS
REMOVAL FROM PALLET
MINIMUM DISTANCE FROM COMBUSTIBLE MATERIALS
DIMENSIONS
08/2021 - EN
> 20
> 20
> 21
> 22-23
> 24-25
> 26-27
> 28
> 29
> 30
> 31
> 32
> 33
> 34
> 34
> 35
3