PIONEER DJ DDJ-WEGO3 Manual De Instrucciones página 5

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
If sound is not output from the [MASTER] output terminals or the
level of the output sound is low, increase the volume of the Android
device.
Sound is output from the speakers.
Monitoring sound with headphones
1 Set the positions of the controls, etc., as shown
below.
Name of part
[HEADPHONES LEVEL] control
2 Turn headphone monitor 1 or 2 on.
Turn on the button of the deck you wish to monitor.
3 Turn the [HEADPHONES LEVEL] control.
Adjust the level of sound output from the headphones to an appropriate
level.
Inputting the sound of the microphone
(when Android 5.0 or later only)
The sound of the microphone connected to the [MIC] input terminal can
be mixed.
1 Connect a microphone to the [MIC] terminal.
Operation
Rotate it clockwise until it stops.
2 Turn the [MIC LEVEL] control to adjust the sound level
of the microphone.
Turning off the system
1 Quit WeDJ for Android.
2 Press the [STANDBY/ON] button until the unit enters
standby.
© 2017 Pioneer DJ Corporation. All rights reserved.
<DRH1477-A>
5
En
loading