Idiomas disponibles
Idiomas disponibles
3. Charging with Power Adapter (not recommended, and operation of the
robot is prohibited during charging)
In case the robot is out of power and unable to be powered on, follow the
steps below to charge the robot with a power adapter:
① Turn off the power switch of the robot.
② Open the cover for the manual charging port on the back of the robot
and connect the adapter to the robot with the charging cable.
③ Upon successful connection, the indicator on the adapter turns red and
the charging page is displayed, indicating that the robot is being
charged.
④ The charging is completed when the indicator turns green. Disconnect
the robot from the power adapter and close the cover for the manual
charging port.
Emergency Handling
In the following cases, you can stop the robot by pressing the emergency stop
switch on its back:
1) The robot is not working properly and may cause damage to the surrounding
environment.
22
