Idiomas disponibles
Idiomas disponibles
UK
USER MANUAL
Quick start guide
1 - Status LED
2 - Pairing button
3 - Type-C charging port
4 - Headphones
5 - Multifunction button
IMPORTANT NOTICE
FULLY CHARGE THE HEADPHONES THE
FIRST TIME THEY ARE USED
REMOVE THE PROTECTIVE STICKERS
FROM THE CHARGING PINS
Automatic pairing for the first time
1 - Remove the headphones
2 - Activate Bluetooth® on your phone
3 - Locate headphones in the device list
4 - Select "SBS NHUSH" to pair
Switching on
Open the box:
the headphones will pair up with
each other and will be ready to
connect to the phone.
Manual mode:
press and hold both touch buttons
for 3 seconds.
In both cases, closing the box with
headphones plugged in will also
start charging.
Switching off
Insert both headphones into the
box and close it; they will switch off.
Manual mode: press and hold both
touch buttons for 5 seconds.
6
Functions summary
Function
Answer/End
a call
Reject call
Pause/Play
Next/ previous
track
Raise/lower the
volume
Activate the
voice control
ANC noise reduction Press and hold
the MLF button until "ANC mode" is
heard; press and hold until "ANC Off"
is heard to deactivate.
Transparency Function
Press and hold the MLF button until
"Transparency mode" is heard.
Function button
Press
and
hold
headphones together.
Environmental noise cancellation ENC
Automatic during calls.
Hall Switch Function
After pairing for the first time, the
headphones will connect to the
device automatically if you simply
open the charging case (provided
the headphones are inside it)
LED summary
Box charging start-up - Orange 10s
Box charging completed - Green 4s
Action
Button
1 tap
Left/Right
3
Left/Right
seconds
1 tap
Left/Right
2 tap
Left/Right
3 tap
Left/Right
2
Left/Right
seconds
to
pair
the
