Idiomas disponibles
Idiomas disponibles
COMPONENTS
1
Trigger lever
2
Safety lock lever
3
Cutting blade
4
Output shaft with blade screw connection
5
Compressed air nipple
6
Spanner for blade screwing
7
Compressed air inlet
USE
Mount the compressed air nipple (5) to the compressed air
inlet (7).
Put a few drops of compressed air tool oil into the tool
through the compressed air inlet.
Loosen and remove the hex bolt on the output shaft (4) with
the wrench (6).
Position the blade onto the profile of the output shaft (4) with
the bevelled edge facing the tool. Caution: Only use
accessory blades with the same or greater oscillation value.
Reposition the blade screw (4) and tighten it with the spanner
(6).
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
