IMPORTANT WARNINGS FOR THE INSTALLER
1. COMPONENTS (Fig. 1)
2. TECHNICAL SPECIFICATIONS
3. ELECTRICAL CONNECTIONS (Fig. 4)
4. INSTALLATION
4.1. PRELIMINARY CHECKS
4.2 INSTALLATION DIMENSIONS
4.3. INSTALLING THE OPERATOR
4.4. WIRING THE OPERATOR
4.5. POSITIONING THE MECHANICAL STOPS
5. AUTOMATED SYSTEM TEST
6. MANUAL MODE OPERATION
7. SPECIAL APPLICATIONS
8. MAINTENANCE
9. REPAIRS
10. ACCESSORIES
Manufacturer:
GENIUS S.p.A.
Address:
Via Padre Elzi, 32 - 24050 - Grassobbio- Bergamo - ITALY
Declares that:
Operator mod. COMPAS 24 - COMPAS 24 C
•
is built to be integrated into a machine or to be assembled with other machinery to create a machine under the provisions of Directive
2006/42/EC;
•
conforms to the essential safety requirements of the following EEC directives:
•
2006/95/EC Low Voltage directive.
•
2004/108/EC Electromagnetic Compatibility directive.
•
and also declares that it is prohibited to put into service the machinery until the machine in which it will be integrated or of which it will
become a component has been identified and declared as conforming to the conditions of Directive 2006/42/EEC and subsequent
modifications.
Grassobbio, December 30, 2009
Read this installation manual to the full before you begin installing the product.
The symbol
indicates notes that are important for the safety of persons and for the good condition of the automated system.
The symbol
CE DECLARATION OF CONFORMITY
COMPAS 24 - COMPAS 24 C powered on 230V~
Notes on reading the instruction
draws your attention to the notes on the characteristics and operation of the product.
COMPAS 24 - COMPAS 24C
INDEX
Managing Director
D. Gianantoni
Page
Guide for the installer
page.6
page.6
page.6
page.6
page.6
page.6
page.6
page.7
page.7
page.7
page.7
page.7
page.8
page.8
page.8
page.8
