Idiomas disponibles
Idiomas disponibles
OVERVIEW
1. Tone Arm Lever
The fixed tonearm can be unlocked (raised and lowered) by using this
lever.
2. Auto-stop Switch ON/OFF
This switch turns auto stop on or off. When the automatic stop is
enabled, the platform will start rotating as soon as the tone arm is
placed over the record and will stop rotating when it has reached the
end of the record. Some vinyl records stop before the end or do not
stop when the end is reached. In this case set Auto-stop to OFF.
3. Tone Arm Clip
This specially designed arm clip secures the tonearm while at rest or
when not in use.
4. 33 / 45 RPM Switch
This switch controls the RPM of the turntable platter.
5. Tone Arm
Cartridge (with needle)
6.
When the turntable is not in use, it is recommendable to place the
removable protection cover on the stylus.
7. 45RPM Adaptor
This adaptor allows you to play 45RPM records.
8. Platter
Place your record here.
9. Spindle
10. Volume Control
Adjust the volume for the internal speakers and headphones.
11. Headphones
3.5mm headphone jack connector.
12. Power LED Indicator
13. Speakers
Built-in stereo speakers.
14. Dust Cover
15. USB port
Use the included USB cable to connect your turntable to your computer. The USB connection will send audio signal from the
turntable to your computer.
16. Line Output
The sound signal from long-playing record is sent to this line output. Connect this signal to the line input of an such as an
amplifier or a line input of a CD/DVD player .
OPERATION
1. Connect the record player with the power adapter and plug the other end into a wall power outlet.
2. Remove white protective needle cover by gently pulling towards the front of the unit.
3. Place a vinyl record on the turntable platter and select the desired speed (33/45 RPM) according to the
record.
4. Open the tone arm clip to release the tone arm. Gently move the tone arm and put the cartridge onto the
desired position of the record and the turntable player starts to play.
5. Turn the volume control knob clockwise to adjust the volume.
Note: If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when finished. If Auto Stop Control is
turned OFF, record will NOT stop automatically when finished.
AUTO STOP function applies to most 33RPM vinyl records. However, for very few vinyl records, it will stop when it did not yet
reach the end (in this case, turn the AUTO STOP switch to OFF position and then it will continue playback), or it will not stop
when it has reached the end when AUTO STOP is ON.
3
