Idiomas disponibles
Idiomas disponibles
UNPACKING
This product requires assembly.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the Packing
List are included.
WARNING:
Do not use this product if any parts in the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Hedge Trimer Head
Intermediate Shaft
Power Handle
Blade Cover
Shoulder Harness
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
ASSEMBLY
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
WARNING:
Hedge trimmer blades are extremely sharp. Do not
remove the blade cover until the hedge trimmer is fully
assembled and ready to use. Always use caution when
removing the blade cover. Failure to comply could result
in possible serious personal injury.
CONNECTING THE POLES
See Figure 2.
Insert the plug on the intermediate pole into the socket
on the power handle and push together until fully seated.
The plug is larger on one side and will only install one
way.
Push the collar on the power handle to the threaded base
on the intermediate pole and rotate clockwise to secure.
Repeat this process to attach the intermediate pole to the
hedge trimer head. Be careful to avoid cross-threading.
NOTE: When assembled correctly, power handle and hedge
trimer head should not be able to separate from intermediate
pole when pulled. Be sure the threaded collars are tightened
securely.
WARNING:
Failure to securely assemble and lock all poles together
as directed above could cause the poles to separate and
could result in serious personal injury or death.
ATTACHING THE SHOULDER HARNESS
See Figure 3.
Remove the battery pack if installed.
Connect the latches on the shoulder harness to the strap
hangers.
Adjust the harness to a comfortable position.
7 — English
