Bartscher 700133 Manual Del Usuario página 44


Wait until the device reaches the preset temperature and put the wine bottles inside.
Hint: Keep in mind that in case of maximum load of the device chambers it must
work longer to reach the preset temperature.
When preset temperature (e.g. 20°C) is reached, in the bottom and
on the right side of temperature value "c" character appears.
When preset temperature (e.g. 5°C) is not reached yet, the
character "c" is displayed in the top and on the right side of
temperature value.

By pressing two buttons
switch between °C and °F.

With use of buttons

Button is used for turning on and off the internal
light; LED lamp is installed under the ceiling of a
given chamber.

Temperature in the device depends on environment, number of stored bottles, and
preset temperature.

Moreover the device is equipped with heating, so in case of lower ambient
temperatures it may maintain wine temperature at desired level.

When the device is no longer used, turn it off using ON/OFF and disconnect from the
power supply (pull the plug!).
- 40 -
and simultaneously for 5 seconds it is possible to
and it is possible to adjust temperature every 1°C.