Num'axes PIE1066 Manual De Instrucciones página 26

Date/Time
Default Settings
Beep Sound
Audio recording
Playback volume
System
5.4. Photo/video playback on the LCD screen
− Slide the switch to the ON position.
− Long press the DOWN/REPLAY button to enter the playback function
− Press  or  to browse the recorded photo and/or video files.
− Videos: press OK to start reading a video. Press OK again to pause. Long press the
DOWN/REPLAY button to stop the video.
− Long press the DOWN/REPLAY button to exit.
5.5. Delete files
− Slide the switch to the ON position.
− Long press the DOWN/REPLAY button to enter the playback function
− Press  or  to browse the recorded photo and/or video files.
2023/02/10 (YYYY/MM/DD)
15 : 57 : 28
NOTE: it's important to set the date and time to ensure
some functions work as expected (for example: time
stamp on the photos, operation during a defined time
period).
No | Yes
Select "Yes" to reset the camera back to the factory
default settings.
OFF | ON
You can choose to hear a beep sound or not when you
press a button on the device.
OFF | ON
Allows you to activate or deactivate the audio recording
on the videos.
Low | Normal | High
Allows you to adjust the sound volume when playing
videos on the camera.
FW UPDATE: allows you to update the firmware installed
in the camera
FW VERSION: indicates the firmware version installed in
the camera (MCU, DSP)
Guide PIE1066 – Mars 2023 – ind. A - 26/78