Num'axes PIE1066 Manual De Instrucciones página 21

OK button
DOWN button | REPLAY button (long press)
3. Installing the batteries
The camera runs on 4 AA size batteries. The product can work with alkaline, lithium
or Ni-MH rechargeable batteries.
You can purchase alkaline or Ni-MH AA batteries at any time on
www.numaxes.com.
Before inserting or removing the batteries, the camera must be turned off (switch
in the OFF position).
When inserting the batteries, make sure to follow polarities indicated inside the
battery slot. Upside down batteries may cause device malfunction.
NOTE: Don't mix battery types! This may cause permanent damage not covered by
the guarantee.
Remove the batteries from the camera if you are not using it for 3 months or more.
The batteries could leak and damage your product.
This camera can also be powered by an external power supply 6V/2A.
4. Installing the memory card
The camera doesn't have an internal memory.
Using a memory card is required to operate the camera (micro-SD card from 4GB up
to 32GB maximum – class 10 minimum).
UP button | MENU button (long press)
Guide PIE1066 – Mars 2023 – ind. A - 21/78
ON/OFF switch