Haier AS12PBAHRA Manual De Instrucciones página 8

Operation
Sleep Operation
Press button to enter additional options, when
cycle display to ,
enter to sleep function.
Operation Mode
1. In COOL,DRY mode
1 hours after SLEEP mode starts,temp.will become 1℃
higher than temp.setting.After another hour,temp.rises by a
further 1℃ .The unit will run for further 6 hours then stops
when the Temp. is higher than temp.setting so that the
room temperature remains comfortable for your sleep.
SLEEP operation starts
1 hr
Rises 1
1 hr
Temp.setting
In COOL, DRY mode
2. In HEAT mode
1 hours after SLEEP mode starts, temp will become 2℃
lower than temp.setting. After another hour, temp
decreases by 2℃ futher.After an additional another 3
hours,temp.rises by futher 1℃. The unit will run for a further
3 hours then stops.When the temp.is lower than temp.
setting so that room temperature remains comfortable for
your sleep.
Temp.setting
1 hr Decreases 2
1 hr
Decreases 2
3 hrs
SLEEP
operation starts
In HEAT mode
In AUTO mode
3.
The unit operaters in corresponding sleep mode
adapted to the automatically selected operation mode.
will flash. And then press
SLEEP operation stops
Approx.6hrs
Rises 1 C
O
C
O
Unit stop
Unit stop
C
O
C
O
3 hrs
Rises 1 C
O
SLEEP
operation stops
4. In FAN mode
It has no SLEEP function.
5.Set the wind speed change when sleeping
Set the wind speed to low if the unit will be on during
sleep times.
Note
When TIMER function is set, the sleeping function can't
be set up .After the sleep function is set up, if user
resets TIMER function, the sleep function will be
cancelled; the machine will be in the state of timing-on.
TURBO/QUIET Operation
TURBO Operation
(1)
When you need rapid heating or cooling, you can use this function.
Press button to enter additional options, when cycle
display to , will flash，and then press
power function. When the function is canceled, please enter
additional options and to cancel the turbo function.
QUIET Operation
(2)
You can use this function when silence is needed for rest or reading.
Press QUIET button, the remote controller will show
the quiet function is now active. To cancel Quiet function,
press the QUIET button.
Note
During TURBO operation, in rapid HEAT or COOL mode ,
the room will show inhomogeneous temperature distribution.
If the unit is in QUIET operation for a long period, this will
effect desired air temperature.
5
,enter to
,