Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4. When the preset time is reached, the light around the ON/OFF button will illuminate blue and brewing will
begin as indicating above under the MAKING COFFEE IMMEDIATELY steps 6-9. The light around the
PROG/BOLD button will turn off.
IMPORTANT: To cancel the PROGRAM (future brew) start time, press the PROG/BOLD button, the PROG
icon will disappear from the LCD display and the light around the PROG/BOLD button will turn off.
5. To change the preset start time, simply press the PROG button until "PROG" appears in the display.
6. Following steps 1-3 as described above, adjust future brew time.
NOTE: To recall the future start PROGRAM time, press the PROG/BOLD button twice. If the future brew
time is ok as is displayed, press the PROG/BOLD button twice again until "PROG" appears in the display.
Tips: to preset the previous future brew, simply press the PROG/BOLD button, the LCD will display PROG
and the light around the PROG/BOLD button will illuminate blue. The coffee maker is ready for future brew.
Setting the BOLD function
The Bold setting adjusts the brewing cycle of a full pot of coffee, allowing more time for the coffee to "steep"
to extract further oils and flavor from the coffee bean. This results in a bolder tasting pot of coffee
1. Press and hold the PROG/BOLD button until the word BOLD appears on the screen.
2. To remove the BOLD function, simply press and hold the PROG/BOLD button until the BOLD
function disappears.
Pause and Serve
Using the pause and serve feature: If you wish to serve a cup of coffee before the brew cycle is completed,
simply remove carafe from the warming plate. Dripping will automatically cease. Return the carafe onto the
warming plate; dripping will resume.
CAUTION: To prevent injury when utilizing pause and serve feature, replace carafe within 30 seconds after
removing during the brewing process.
1. After approximately 2 cups of coffee have been brewed, the carafe may be slowly removed and the coffee
will stop dripping.
2. The flow valve is located on the bottom of the filter holder and is activated when the carafe is removed.
This design makes it possible for you to remove the carafe and pour a cup of coffee before the entire
carafe is brewed.
IMPORTANT: When replacing the filter holder, the flow valve must be properly inserted into the front hole
of the machine, so that it can be seen as it sits on the top of the carafe lid.
3. When using this feature, make sure that the carafe is replaced under the filter holder within 30 seconds
to prevent overflow.
Brewing a Second Pot of Coffee
To brew another pot of coffee, press the ON/OFF button to turn the coffee maker off. Wait 15 minutes to allow
the heating element to cool. Remove and dispose of the used coffee grounds; then rinse the carafe and filter
basket with water and repeat the brewing procedure detailed in the "BREWING COFFEE" section.
NOTE: If you do not allow the appliance to cool completely before reuse, water in the water reservoir may
overheat, causing steam to be released. This could result in burns and/or other personal injury.
Hints for Great Tasting Coffee
•
A clean Coffee Maker is essential for making great tasting coffee. Regular cleaning, as described in
the Cleaning & Maintenance Instructions and Descaling sections of this Instruction Manual is
highly recommended.
•
Always use fresh, cold water in your Coffee Maker.
•
Finer grinds, such as drip coffee, promote fuller extraction and provide rich, full-bodied coffee.
Regular grind will require slightly more coffee per cup to provide the strength of a finer grind.
•
Store coffee in a cool, dry place.
•
For optimum coffee flavor, buy whole beans and grind them finely just before brewing.
•
Do not re-use coffee grounds since this will greatly impair coffee flavor.
•
Reheating coffee is not recommended. Coffee is at its peak flavor immediately after brewing.
•
Small oil droplets on the surface of brewed, black coffee is due to the extraction of oil from
the coffee grounds. Oiliness may occur more frequently if heavily roasted coffees are used.
Over extraction may also cause oiliness, indicating a need to clean your Coffee Maker.
SO-312565_14438_BELLA_12 cup CM Progra._Shopko_iM_R5.indd 7
7
2015-07-14 8:29 AM
Tabla de contenido
