RedMax EBZ5100Q Manual De Instrucciones página 2

2
English
SAFETY FIRST
Instructions contained in warnings within this manual
and warning seals marked with a
blower concern critical points which must be taken into
consideration to prevent possible serious bodily injury,
and for this reason you are requested to read all such
instructions carefully and follow them without fail.
Note that there may be times when warning seals peel
off or become soiled and impossible to read. If this
happens, you should contact the dealer from which you
purchased the product to order new seals and affix the
new seal(s) in the required location(s).
■ NOTES ON TYPES OF WARNINGS
WARNING
Instructions labeled as shown at left, concern
critical steps or procedures which must be
followed in order to prevent accidents which could
lead to serious bodily injury or death.This mark is
used to indicate instructions which must be
followed without exception.
IMPORTANT
Instructions labeled as shown at left concern steps or
procedures which, if not followed correctly, could lead
to mechanical failure, breakdown, or damage.
NOTE
Used to label supplementary instructions designed to
provide hints or directions useful in the use of the
product.
Contents
1. Parts location .............................................4
2. Specifications.............................................4
3. Warning labels on the machine .....................6
4. Symbols on the machine ..............................8
5. For safe operation ....................................10
6. Set up ...................................................22
7. Fuel ......................................................24
8. Operation ................................................30
9. Maintenance ..........................................36
10. Storage ...................................................44
11. Disposal ................................................44
12. Troubleshooting guide ..............................46
13. Parts list ................................................47
symbol on the
loading