Functional Description - Milwaukee M18 FUEL SUPER HAWG 2809-20 Manual Del Operador

Ocultar thumbs

Contenido

página de 19

/ 19
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact ac-

cidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation

or burns.

• Do not use a battery pack or tool that is dam-

aged or modified. Damaged or modified batteries

may exhibit unpredictable behavior resulting in fire,

explosion or risk of injury.

• Do not expose a battery pack or tool to fire or

excessive temperature. Exposure to fire or tem-

perature above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specified in the instructions. Charging im-

properly or at temperatures outside the specified range

may damage the battery and increase the risk of fire.

SERVICE

• Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES FOR

SUPER HAWG

• Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

• Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring. Cutting

accessory contacting a "live" wire may make exposed

metal parts of the power tool "live" and could give

the operator an electric shock.

•

To reduce the risk of injury in ap-

WARNING

plications that produce a consid-

erable amount of dust, use an OSHA compliant

dust extraction solution in accordance with the

solution's operating instructions.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Maintain labels and nameplates. These carry

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

•

Some dust created by power sanding,

WARNING

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

filter out microscopic particles.

Cat. No. ..................................................... 2809-20

Cat. No. ......................................................2811-20

Volts.............................................................. 18 DC

Battery Type .................................................M18™

Charger Type ................................................M18™

No Load RPM ................... High 0-1550, Low 0-500

Recommended Ambient

Capacities:

™

cific charging instructions, read the operator's

manual supplied with your charger and battery.

To remove the battery, push in the release buttons

and pull the battery pack away from the tool.

To insert the battery, slide the pack into the body

of the tool. Make sure it latches securely into place.

may be hazardous.

SYMBOLOGY

Volts

Direct Current

No Load Revolutions per

Minute (RPM)

UL Listing Mark pour

Canada et États-unis

SPECIFICATIONS

Operating Temperature ......................0°F to 125°F

Steel

Twist Bit ............................. High 5/16", Low 1/2"

Wood

Auger Bit ........................High 1-1/2", Low 1-1/2"

Ship Auger Bit ................High 1-1/2", Low 1-1/2"

Selfeed Bit ...................High 2-9/16", Low 4-5/8"

Hole Saw ................................... High 4", Low 6"