Idiomas disponibles
Idiomas disponibles
14
F
unction of each Button
WATER TEMPERATURE
BUTTON (OPTION)
• Use to select Water
Temperature.
Pressing the button
allows you to select
Cold
WARM
(Hot & Cold)
Cold respectively.
Default setting is Cold.
AIR DRY
• This button is used for
air-drying of your laundry.
• Air dry selections light up
in sequence as follows.
TUB DRY
120
TUB DRY as the
button is pushed.
NOTE
* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by
8minutes at maximum and decreased by 4 minutes at maximum.
* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically
adds rinsing, and the remaining time may be increased.
* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to
the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a
liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.
WATER LEVEL BUTTON
• Use to select the proper amount of water
in relation to the weight and type of laundry.
• Automatically controlled, but can be
selected manually by pressing the
WATER LEVEL Botton.
Hot
• WATER LEVEL is automatically selected
for FUZZY(normal) program.
The following settings are indicated as the
button is pushed
2
3
4
CHILD LOCK FUNCTION
• Use to lock or unlock the control
buttons to prevent settings from
being changed by a child.
To lock, push the RINSE and SPIN
60
90
buttons simultaneously and to unlock
push them one more time during the
washing process.
(refer to page 25)
7
8
9
10
1
5
6
7
TIME LEFT, DELAY START
(RESERVATION), ALARM INDICATION
• Time left - During operation, the
remaining time is indicated.
• DELAY Start indication (Reservation) -
When DELAY start (reservation)
program is selected, it indicates the
finishing time. (RES.=DELAY)
• Alarm indication -When an error occurs,
an error message appears to indicate the
abnormality.
For example, DEindicates that the lid is open.
WASH. RINSE. SPIN BUTTON
• Use when wash, rinse, spin time need to
be adjusted.
• The time increases when the button is pressed.
• If adjustments are needed during the
wash, press the [start/pause] button
before making any changes.
• When the button is pressed during
washing, the remaining time is displayed.
