Idiomas disponibles
Idiomas disponibles
Remote Controller buttons and display
1
Display
1
Mode selection
AUTO
AUTO
+ TANK
HEAT
HEAT
+ TANK
Operation icons
2
The status of operation is displayed.
Icon will not display (under operation OFF screen) whenever operation is OFF except weekly timer.
Holiday operation status
Zone: Room Thermostat
→Internal sensor status
Room Heater status
*1 The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised service partners.
*2 Only displayed when COOL mode is unlocked (This means when COOL mode is available).
8
2
• Depending on the preset outdoor
temperature, the system selects
HEAT or *
COOL operation mode.
1
Auto Heat
Auto Cool
• Depending on the preset outdoor
temperature, the system selects
HEAT + TANK or *
COOL + TANK
1
operation mode.
Auto Heat
Auto Cool
• The panel/floor HEAT operation is
either turned ON or OFF.
• The outdoor unit provides heat to
the system.
• The outdoor unit provides heat to
the water tank and the system.
• This mode can be selected only
when the water tank is installed.
Weekly Timer operation status
Powerful operation status
Tank Heater status
3
4
7
*
*
COOL
• The fan coil unit is either turned
1,
2
ON or OFF.
• The outdoor unit provides cooling
to the system.
*
*
COOL
• The outdoor unit provides cooling
1,
2
to the system.
+ TANK
• The system controls the booster
heater in the water tank.
TANK
• The water tank is either turned
ON or OFF.
• The outdoor unit provides heat to
the water tank.
* The direction icons point to the currently
active mode.
5
6
• Room operation / Tank operation.
• Deice operation.
Quiet operation status
Demand Control or
SG ready or SHP status
