Specifications - WIKA Mensor CPC2000 Manual De Instrucciones

11. Specifications

11. Specifications
Reference pressure sensor
Pressure range
Gauge pressure
1)
Accuracy
Gauge pressure
1)
Accuracy
Calibration interval
Pressure units
Overpressure protection
1) It is defined by the total measurement uncertainty, which is expressed with the coverage factor (k = 2) and includes the following
factors: the intrinsic performance of the instrument, the measurement uncertainty of the reference instrument, long-term stability,
influence of ambient conditions, drift and temperature effects over the compensated range during a periodic zero point correction.
2) FS = Full span = end of measuring range - start of measuring range
Base instrument
Instrument
Instrument version
Dimensions
Weight
Warm-up time
Pressure generation
Ingress protection
Display
Screen
Resolution
Keyboard
Connections
Pressure connections
Permissible pressure media
Wetted parts
WIKA operating instructions, model CPC2000
0 ... 1 mbar
2)
0.3 % FS
0 ... 10 mbar
0 ... 500 mbar
2)
0.1 % FS
365 days
Pa, kPa, hPa, bar, mbar, psi, inH
5 times; ≤ 100 mbar
2 times; > 100 mbar ... ≤ 1,000 bar
Desktop instrument with carrying handle
102.6 x 257 x 271 mm [4.04 x 10.12 x 10.67 in] without carrying
handle
4.6 kg [10.14 lbs]
approx. 15 min
internal, electric pump
IP20
backlit, multi-line graphic display
4 ... 5 digits depending on range and units
Membrane keyboard
6.6 x 11 (hose diameter D = 6 mm)
Ambient air
Ni, Al, CuBe, PUR
0 ... 50 mbar
0 ... 1,000 mbar
O, inHg, mmHg, Torr
2
0 ... 100 mbar
39
EN