Velleman VDPDMXDP134 Manual De Instrucciones

VDPDMXDP134 – 6-CHANNEL DIMMER PACK
1. Introduction & Features
Thank you for buying the VDPDMXDP134 ! Please read the manual carefully before bringing
this device into service.
This powerful and versatile device features 6 channels with LED indication. The device is
controlled through DMX or an analogue input and is equipped with a preheating function and a
two-phase power output.
Check carefully for damage caused by transportation. Consult your dealer and don't install this
device if it has been damaged in transit.
2. Safety Instructions
Be very careful during the installation : touching live
wires can cause life-threatening electroshocks.
Keep this device away from rain and moisture
Unplug the mains lead before opening the housing
• A qualified technician should install and service this device.
• Damage caused by disregarding certain guidelines in this manual is not covered by the
warranty and the dealer will not accept responsibility for the ensuing defects or problems.
• Do not switch the device on immediately if it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room
temperature.
• This device falls under protection class I. It is essential, therefore, that the device be earthed.
Have this device installed by a qualified technician.
• Make sure that the available voltage does not exceed the voltage stated in the specifications
of this manual.
• Do not crimp the power cord and protect it against damage from sharp edges. Ask an
authorised dealer to replace the cord if necessary.
• Always disconnect the device from the mains when it is not in use or when you wish to clean
it. Only handle the power cord by the plug. Never pull out the plug by tugging the power cord.
• Note that damage caused by user modifications to the device are not covered by the
warranty. Keep the device away from children and unauthorised users.
VDPDMXDP134 1 VELLEMAN