SOLAC PC1503 Instrucciones De Uso página 7

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
EN
(Original instructions)
Garment Steamer
PC1503
DESCRIPTION
A.
Delicate garment brush
B.
Thick garment brush
C.
Water filling cover
D.
Soleplate
E.
Handle
F.
Steam switch
G.
Steam selection button
H.
Water tank
I.
Display
J.
Auto shut off indicator
K.
Max steam rate indicator
L.
Min steam rate indicator
M.
Steam off
If the model of your appliance does not have
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
USE AND CARE:
Fully extend the appliance's power cable
before each use.
Do not start the appliance without water.
Use the handle to hold or transport the
appliance.
Do not use the appliance tilted, or turn it over.
Do not turn the appliance over while it is in use
or connected to the network.
Do not force the appliance's work capacity.
Unplug the appliance from the mains before
refilling the water tank.
Unplug the appliance when not in use and
before carrying out any cleaning, adjusting,
loading or changing accessories.
Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
Do not store the appliance if it is still hot.
Use the appliance and its accessories and
tools in accordance with these instructions,
taking into account the working conditions and
LIBRO MANUAL PC1503.indb 7
LIBRO MANUAL PC1503.indb 7
the work to be performed. Use the appliance
for operations different from those intended
could result in a hazardous situation.
It is advisable to use distilled water, especially
if the water in your area contains clay or if it is
"hard" (containing lime or magnesium).
Never leave the appliance connected and
unattended if is not in use. This saves energy
and prolongs the life of the appliance.
Do not use the appliance on any part of the
body of a person or animal.
CAUTION: Water condensation may appear on
the surfaces and objects around this appliance.
INSTRUCTIONS FOR USE
BEFORE USE:
Make sure that all products' packaging has
been removed.
Some parts of the appliance have been
lightly greased. Consequently, the first time
the appliance is used a light smoke may be
detected. After a short time, this smoke will
disappear.
Prepare the appliance according to the function
you wish to use:
When operating the garment steamer for the
first time, allow it to steam for a few minutes,
this will remove any impurities and odours that
might have been left by the manufacturing
process.
When operating the steam garment for the first
time, you may want to try the steamer on an
old piece of fabric before steaming your fabric.
FILLING WITH WATER:
You must fill the water compartment before
turning on the appliance.
Open the tank moving it clockwise.
Open silicone cover located in the bottom of
the water tank.
Fill the tank with water till MAX.
Close the cover
Put the tank back into its place moving
counter-clockwise.
USE:
Extend the cable completely before plugging
it in.
Connect the appliance to the mains.
Press the steam selector button and choose
between "Steam Off", "ECO" and "MAX"
9/2/22 18:22
9/2/22 18:22
loading