Emerson FLORET ECO Manual Del Usuario página 9

3. Ceiling Fan Assembly
3.10
Loosen the Two Phillips Head Set Screws in the Motor
Coupler for installation of the Downrod (Figure 10).
Seat the Downrod in the Motor Coupler (Figure 10).
Rotate and align the Downrod holes with the Two Holes
in the Motor Coupler (Figure 10).
3.11
Slide the Clevis Pin through the Motor Coupler Holes.
Install the Hairpin Clip through the Clevis Pin Holes to
secure (Figure 11).
NOTE: The Clevis Pin must go through the holes in
the Motor Coupler. It is critical that the Clevis Pin is
properly installed and secure.
WARNING
!
It is critical that the clevis pin and hairpin clip in the
motor coupler are properly installed and secured.
Failure to verify that the pin is properly installed could
result in the fan falling.
(Continued)
MOTOR
COUPLER
Figure 10
DOWNROD
CLEVIS PIN
Figure 11
9
Please contact 1-800-654-3545 for further assistance
9
DOWNROD
LOOSEN
PHILLIPS HEAD
SET SCREWS (2)
HAIRPIN
CLIP
CLEVIS
PIN
HAIRPIN
CLIP
emersonfans.com
ETL Model No.: CF840