Idiomas disponibles
Idiomas disponibles
7. Installation of No-Light Cover
WARNING
!
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring
must be in accordance with National and Local codes
and the ceiling fan must be properly grounded as a
precaution against possible electrical shock.
IMPORTANT: Disconnection of the LED Light
Fixture Assembly Terminals from the Fan Motor
Housing Terminals prior to Assembly of the
No-Light Cover, IS necessary.
NOTE: If Shade is installed on the Ceiling Fan,
Remove the Shade as follows:
7.1
Remove the Shade from the opening of the Lower
Housing by turning the Shade Counter-Clockwise to
disengage it from the Lower Housing Assembly Three
Dimples (Figure 32).
NOTE: Store the Shade in a safe place for future
use, if needed.
7.2
Remove and Retain the Three #6-32 x 1/4" Truss Head
Screws with Lockwashers from the Lower Housing
Assembly (Figure 33).
ROTATE SHADE
COUNTER-CLOCKWISE
SHADE FLAT
AREAS (3)
Figure 32
LED LIGHT FIXTURE
ASSEMBLY
Figure 33
Please contact 1-800-654-3545 for further assistance
19
(Optional)
LOWER HOUSING
ASSEMBLY DIMPLES (3)
LOWER HOUSING
ASSEMBLY
#6-32 x 1/4" TRUSS HEAD SCREWS
WITH LOCKWASHERS (3)
emersonfans.com
ETL Model No.: CF840
