ResMed Mirage FX Manual De Instrucciones página 29

Environmental conditions – all masks:
Operating temperature: +5 °C to +40 °C
Storage and transport temperature: -20 °C to +60 °C
Storage and transport humidity: up to 95 % onon-
Storage
Ensure that the mask is thoroughly clean and dry before storing it for any length
of time. Store the mask in a dry place out of direct sunlight.
Disposal
The mask does not contain any hazardous substances and may be disposed of
with your normal household refuse.
Symbols
The following symbols may appear on the mask or packaging.
Caution, consult accompanying documents;
Number; European Authorised Representative;
limitation; Humidity limitation;
Manufacturer.
Warnings
The vent holes must be kept clear.
The mask should not be used unless the device is turned on. Once the mask is
fitted, ensure the device is blowing air.
Follow all precautions when using supplemental oxygen.
Oxygen flow must be turned off when the CPAP or bilevel device is not
operating so that unused oxygen does not accumulate within the device
enclosure and create a risk of fire.
Operating humidity: 15 % to 95 % non-
condensing
condensing
LOT
Batch Code;
Temperature
Does not contain natural rubber latex;
At a fixed flow rate of supplemental oxygen flow, the inhaled oxygen
concentration varies depending on the pressure settings, user breathing
pattern, mask, point of application and leak rate.
If any visible deterioration of a mask component is apparent (cracking, tears,
etc), the mask component should be discarded and replaced.
Do not use aromatic-based solutions or scented oils (eg, eucalyptus or essential
oils), bleach, alcohol or products that smell strongly (eg, citrus) to clean any of
the mask components. Residual vapours from these solutions can be inhaled
and may also damage the mask, causing cracks.
Your physician or sleep therapist is responsible for ensuring that the mask
is compatible with the device. If used outside specification or if used with
incompatible devices, the seal and comfort of the mask may not be effective
and optimum therapy may not be achieved.
Do not combine components from different mask systems.
Discontinue using the mask and consult your physician or sleep therapist if you
have ANY adverse reaction.
Refer to your CPAP or bilevel device manual for details on its settings and
operational information.
This mask should be disinfected and/or sterilised when used between users.
Remove all packaging before using the mask.
REF
Catalogue
Using a mask may cause tooth, gum or jaw soreness or aggravate an existing
dental condition. If symptoms occur, consult your physician or dentist.
Consumer Warranty
ResMed acknowledges all consumer rights granted under the EU Directive
1999/44/EG and the respective national laws within the EU for products sold
within the European Union.
Clinical Information
The mask contains passive venting to protect against rebreathing.
Technical specifications, cleaning, disinfection and sterilisation instructions are
available in the mask specific user guide on www.resmed.com on the Products
page under Service & Support.
29