Bracket Installation - Work Pro W WFS 1200 Manual De Uso

LAMP INSTALLATION
1. Screw out the fixing screws placed in the back lid (fig. B1) and extract the lamp holder (fig. B2).
2. Loose the fixing screw on the top lid and open the upper cover (fig. B3)
3. Insert a new lamp (CSR 1200/2) in the lampholder (fig. B4), tightening it firmly (fig. B5).
4. Pull out the back lid, insert the lamp through the middle hole of the reflector, install the screws and tighten
it (Fig. B6).
Fig. B1
STAND INSTALLATION (included)
1. Extract the stand from its packing box ( fig. A1)
2. Loosen the legs and turn the central scew (fig A2),
adjust the height of the stand according to your
desire and tight the screw to fix the position (fig A3)
Fig. B2
Yoke (bracket)
PAG. 2
User Manual/Manual de Instrucciones

BRACKET INSTALLATION

1. Screw out the two screws placed
on the top of the stand (fig A4).
2. Line the hole of the screws on the
bracket with the holes of the stand
and tight them (fig A5).
3. Loose the yoke of the bracket to
adjust the follow spot to the correct
position, tighting the yoke again.
Fig. B3
EN
WFS 1200