Hilti SIW 2-A12 Manual De Instrucciones Original página 31

Installation opening for acces-
%
sories
Battery state of charge indica-
&
tor
3.2 Intended use
The product described is a hand-held cordless impact wrench. It is designed
for tightening and releasing nuts, bolts, anchors and wood screws.
Use the cordless wrench only for applications that do not require a pre-
cise/specified torque.
• For this product, use only Hilti lithium­ion batteries of the B 12 series.
• Use only Hilti battery chargers of the C4/12 series for charging these
batteries.
3.3 Items supplied
Impact wrench, operating instructions
Other system products approved for use with this product can be found at
your local Hilti Store or at: www.hilti.group
3.4 Charge status display
The charge status of the Li­ion battery is displayed after pressing one of the
release buttons lightly (press only until slight resistance is felt).
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks.
Battery charge status cannot be displayed while the control switch is
pressed and for up to 5 seconds after releasing the control switch.
4 Technical data
4.1 Product information
Rated voltage
Weight in accordance with EPTA procedure
01, without battery
Rated speed under no load
Ambient temperature for operation
Storage temperature
*2384752*
(
)
+
Meaning
Charge status: 75 % to 100 %
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
2384752
Battery release button
Control switch
Tool holder (3⁄8" square drive)
10.8 V
0.75 kg
0 /min ... 2,750 /min
−17 ℃ ... 60 ℃
−20 ℃ ... 70 ℃
English 25