Idiomas disponibles
Idiomas disponibles
1.
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new tool brings you much enjoyment and
success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts
• Application other than specified
Note:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
This operating manual should help you to familiarise
yourself with your device and to use it for its intended
purpose.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual at the device, in a plastic
sleeve, protected from dirt and moisture. They must be
read and carefully observed by all operating personnel
before starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
16 | GB
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. 1)
1.
Aspiration
2.
Flow cup cover
3.
Flow cup
4.
Stroke stop screw (paint volume regulation)
5.
Regulator for round / wide jet
6.
Compressed air connection
7.
Regulator for air volume regulation
8.
Trigger lever
9.
Nozzle head
10. Needle
11. Spring
12. Brush
13. Filter
14. Inner screw thread (flow cup)
3. Scope of delivery
• 1 x compressed air paint spray gun
• 1 x flow cup
• 1 x cover for flow cup
• 1 cleaning brush
• 2 x filters
• 1x operating manual
4. Proper use
This compressed air-operated device is only intend-
ed for the application / spraying of solvent-containing
and water-dilutable paints, glazes, primers, varnishes,
automotive topcoats, stains, wood preservatives, pes-
ticides, oils and disinfectants. The device is not suit-
able for working with dispersion and latex paints, al-
kalis, acidic coating materials, granular and particulate
spraying material or injection and non-drip materials.
Any other use or modification shall be deemed to be
improper use and could give rise to considerable risk of
accident. We will not accept liability for loss or damage
arising from improper use. The device is intended for
private, domestic use only.
www.scheppach.com
