Idiomas disponibles
Idiomas disponibles
For safety, properly ground the switch
Always follow the code standards when installing wired
connections.
Gently push all the excess wiring into the junction box.
Note: make sure all the wires are positioned in an
organized manner and away from the edges of the light
switch and the junction box to avoid pinching any of the
cables, prior to completing the process.
Proceed to align the smart switch to the base on the
junction box, so that it is oriented correctly.
Insert the two center screws through the switch and into
the mounting hole on the junction box. Secure the switch
to the base of the box.
To complete installation, gently push the faceplate into the
box until it snaps in place.
Step 5
Restore power at the breaker
Turn ON the breaker that controls your smart switch to
power it on. Make sure the status LED starts blinking
rapidly. This indicates that the device has entered into
pairing mode.
ON
OFF
ON
OFF
ON
OFF
