Idiomas disponibles
Idiomas disponibles
Hardware installation
IMPORTANT
For safety, properly ground the switch
Always follow the code standards when installing wired
connections.
Step 1
Shut power off at the breaker
Find the breaker that controls the circuit for the junction
box where the smart light switch will be installed. Turn it to
the OFF position.
Place tape over the circuit breaker switch and verify that
power is o .
Note: you can use the circuit tester at this point to verify
that power is cut o .
ON
OFF
ON
OFF
ON
OFF
Step 2
Remove the original switch from the wall box
Identify the neutral wire by looking for one or more white
wires secured with a wire nut.
Neutral
Note: If you can't nd the neutral wire, please open another
wall box. If you still can't nd it, contact a professional
electrician to help you.
Travel
Ground
Common
Travel
