Idiomas disponibles
Idiomas disponibles
2) Neutral wire (white) on the smart switch to neutral on
junction box.
3) Ground wire (green/yellow) on the smart switch to
ground on junction box (ground wire may be yellow/green
or bare copper wire depending on existing electrical
installation.
4) Live/load wire (black) on the smart switch to live/load
wire on the junction box.
5) Connect one traveler wire (red) on the smart switch to
the traveler wire on the junction box. Wrap the other
traveler wire around the end with black electrical tape for a
single pole installation.
b. When connecting to a second 3-way switch
1) Connect the wire ends of each pair into the wire nut,
then twist each nut full turns until the connection is fully
secured. Repeat this step for each cable assembly.
2) Neutral wire (white) on the smart switch to neutral on
junction box.
3) Ground wire (green/yellow) on the smart switch to
ground on junction box (ground wire may be yellow/green
or bare copper wire depending on existing electrical
installation.
4) Live/load wire (black) on the smart switch to live/load
wire on the junction box.
5) Connect both traveler wires (red) on the smart switch to
the traveler wires on the junction box.
Traveler Option
BOX
Common(Load)
Load
Traveler (Live Wire)
Neutral (Live Wire)
Ground Wire
CAUTION
1. Use this traveler for 3 way
2. Cap off this traveler for single pole
3. When use for single pole, this
traveler MUST BE INSULATED
