Supply & Exhaust Air; Supply Air Handle; All Models Except Ecotop; Ecotop - Rohde TE Serie Manual De Instrucciones

5.5. Supply & exhaust air
5.5.1.

Supply air handle

All models except Ecotop

All ROHDE Toploader models are equipped with an air supply handle on the kiln base.
Step Action required
When the handle points to the left, the air supply is cut
1
off.
When the handle points to the right, the air supply is
2
open.
Note:
You can significantly increase the service life of the heating elements by opening the air supply up to a temperature
of 600-700°C.

Ecotop

All ROHDE Toploader Ecotop models are equipped with an air supply handle on the lower right side of the kiln (near
the kiln base).
Step Action required
When the air supply handle is in the middle position, the
1
air supply is shut off.
When the air supply handle points to the left, the air
2
supply is open.
Note:
You can significantly increase the service life of the heating elements by opening the air supply up to a temperature
of 600-700°C.
32 / 161 - EN -
Illustration
Illustration