MADER AGW-180E Manual página 62

Idiomas disponibles

Idiomas disponibles

S
TOP
Turn the engine switch to the "OFF" position.
(Switch position may vary depending on the specifications. Refer to the instruction manual of
driven equipment.)
(In chase of a push button type switch, keep pressing the push button till the engine stops
completely.)
● Replenish the fuel before using up completely. It will make easier at the next starting.
● When there is no subsequent work, drain the fuel from the fuel tank and restart the engine to
use up the fuel remaining in the carburetor.
CAUTION
Place the engine at a horizontal position when the driven equipment is not used at the rest time,
or others, in summer season. (If the tank is tilted as much as the inside of fuel cap is submerged
in the fuel, the fuel may leak.)
Do not touch the engine body, especially the muffler, during or immediately after stopping the
operation. (There is risk of burn.)
P
RECAUTION DURING OPERATION
CAUTION
● Before starting operation, make sure to inspect the engine in accordance with the "Inspection
before starting the engine".
● Do not operate the engine at the indoor or a place with poor ventilation. (Exhaust gas contains
odorless and harmful carbon monoxide.)
● Do not insert in or approach hands or foot at the moving or rotating sections.
● Stop the engine immediately if it has been discovered any leakage of fuel or gas from the
carburetor, muffler, fuel tank, crankcase, cylinder or mating face at respective sections. (Contact
a dealer or service center for repair.)
● Do not change the setting revolution speed of engine unnecessarily.
● Be careful not to touch highly heated muffler or sections on the engine to avoid possible risk
of burn.
● Do not operate the engine while withered grasses, leaves or other inflammable substances are
sticking in or around the muffler cover.
● Do not touch the ignition plug cap or high-voltage cord during operation. (There is risk of
59
loading