Idiomas disponibles
Idiomas disponibles
TRANSPORTING AND STORAGE
When transportation or moving, you can use the lifting eyes.
S
TORAGE
Before you store the pressure washer, make sure you do the cleaning for the machine. (See
clause 6), and then:
1.
Remove gasoline and oil from engine. See Engine Operator's Manual for correct
amount and type.
2.
Disconnect spark plug wire and remove spark plug. See Engine Operator's Manual for
correct amount and type.
W
INTER STORAGE
Items needed: Funnel, 12" piece of garden hose or equivalent and RV antifreeze.
1.
Follow the previous storage instructions.
2.
To winterize the pressure washer, disconnect spark plug wire from engine and remove
high pressure hose from pump. Add RV antifreeze through garden hose connection.
Pull engine rope several times until antifreeze comes out of high-pressure hose
connection.
3.
Remove all water from high pressure hose, gun, and wand. To do so, disassemble high
pressure hose from gun. Drain all water from hose. Hold gun/wand assembly in a
position with the nozzle pointing down and pull gun trigger to remove any water.
L
-
ONG
TIME STORING
When releasing the engine from operation for more than 30 days, it must be serviced and
stored as follows with care to prevent the starting trouble or malfunction due to degeneration of
fuel.
1. Drain the fuel from the fuel tank and start to run the engine till it is stopped due to
use-up of fuel.
2. Wash the inside of fuel tank and fuel filter with white kerosene.
Use of fire is strictly prohibited
3. Removing the ignition plug, inject a small quantity of new engine oil through the
plughole. After idling slowly for few revolutions operating the recoil starter,
install the ignition plug. Pull the recoil starter again and stop it at the position
where it is felt heavy.
4. Clean the external surfaces with soft cloth and store it at a dry place free from fires.
● If the unit is left over without draining fuel, impurities in the fuel could clog the fuel
51
