Polar CK640 Manual De Instrucciones página 23

Troubleshooting
A qualified technician must carry out repairs if required.
Fault
The appliance is not
working
The appliance is
leaking water
The appliance is
unusually loud
Technical Specifications
Note: Due to our continuing program of research and development, the specifications herein may subject
to change without notice.
Model Voltage
CK640 230V~ 50Hz
CK640_ML_A5_v5_20221025.indb 23 CK640_ML_A5_v5_20221025.indb 23
Probable Cause
The unit is not switched on
Plug or lead is damaged
Fuse in the plug has blown
Mains power supply fault
The appliance is not properly
levelled
The discharge outlet is blocked
Movement of water to the drain is
obstructed
The water container is damaged
The appliance has not been
installed in a level or stable
position
Loose nut/screw
Power Current Capacity
500W 4A 3 x GN 2/3
Solution
Check unit is plugged in correctly and
switched on
Replace plug or lead
Replace the fuse
Check mains power supply
Adjust the screw feet to level the appliance
(if applicable)
Clear the discharge outlet
Clear the floor of the appliance (if
applicable)
Replace the water container
Check installation position and change if
necessary
Check and tighten all nuts and screws
Dimensions
Refrigerant
H x W x D
420 x 660 x 650 R290
EN
Weight
(kg)
42
23
2022/10/25 17:35 2022/10/25 17:35