Idiomas disponibles
Idiomas disponibles
Workflow for Acquiring an Image
Attach a fully charged
battery pack to the
detector
Remove the battery pack
for recharging
Figure 17 Workflow for Acquiring an Image
60
Start
Communication
Wireless
Mode
Turn on the detector
Register the detector to the
Radiography Imaging Software
Select or register the patient
information
Prepare the examination setup:
Arrange the patient
Position the X ray collimator
Check all conditions
Start the Software capturing button
Conduct the examination:
Press the Prep switch
Press the Exposure switch
Check the captured images
Turn off the detector
Communication
Wireless
Mode
End
www.vareximaging.com
XRpad2 HWC-M Detectors User Manual
Wired
Start the
Loop back procedure
for each patient
Loop back procedure
for each body part
Wired
Switch off the
