Idiomas disponibles
Idiomas disponibles
4
Cleaning and care
4. Remove the HEPA filter on the cyclone.
5. Clean the cyclone by washing it under running
water.
6. Follow the steps above in reverse order to
assemble the parts together again.
4.2 Cleaning the HEPA filter
1. Press the dust container removal button and
pull the handle of the dust container to remove
it.
2. Grab and pull the cyclone from its handles and
take it out from the dust container (8).
3. Rotate the cyclone cap counterclockwise to
remove it.
4. Remove the HEPA filter on the cyclone.
5. You can wash the filter under running water
after shaking it off.
6. If you wash the HEPA filter, dry it at room
temperature (for 24 hours minimum). Do
not use them before ensuring that they are
completely dry.
7. Install the HEPA filter to the cyclone housing
and fit the cyclone into the dust container (8).
8. Attach the dust container to the body again.
4.3 Cleaning the foam filter
1. Press the dust container removal button and
pull the handle of the dust container to remove
it.
2. Grab and pull the cyclone from its handles and
take it out from the dust container (8).
3. Rotate the cyclone cap counterclockwise to
remove it.
4. Remove the HEPA filter on the cyclone.
5. Remove the foam filter under the HEPA filter.
6. You can wash the filter under running water
after shaking it off.
7. If you wash the HEPA filter, dry it at room
temperature (for 24 hours minimum). Do
not use them before ensuring that they are
completely dry.
10 / EN
4.4 Cleaning the turbo brush
1. Twist the removal button of the turbo brush
cylinder lid with the help of a screwdriver or a
coin and unlock the lid of the brush cylinder.
2. Open the lid of the brush cylinder, remove and
clean the brush.
3. Clean the brush roller with a damp cloth, attach
it to its place and lock the tab.
Cordless Stick Vacuum Cleaner / User Manual
